[Orca-users] Re: orcallator.se runs, but no output

[Mark Langkau]

Blair,

I've commented out both defines, but I still get the same thing.

#truss -p {pid}
.....
ioctl(4, KSTAT_IOC_READ, "hme1")                = 461
ioctl(4, KSTAT_IOC_CHAIN_ID, 0x00000000)        = 461
.....

Weird, eh?   ifconfig does not find hme1 (it's not there).  I wonder why
orcallator thinks it finds one?

- Mark


Blair Zajac wrote:

> If you want to disable the Ethernet card statistics but measure
> everything else, the easiest thing would be to comment out the line
>
> #define WATCH_NET 1
>
> and possibly
>
> #define WATCH_TCP 1
>
> To try to fix this problem with hme1 I would try
>
> touch /reconfigure
> "reboot" or "init 6"
>
> and see if that helps.
>
> Regards,
> Blair
>
> mark.langkau at pbmplus.com wrote:
> >
> > Charlie,
> >
> > Thanks for the reminder.  Here's what truss shows:
> >
> > ioctl(4, KSTAT_IOC_READ, "hme1")                = 461
> > ioctl(4, KSTAT_IOC_CHAIN_ID, 0x00000000)        = 461
> >
> > ...continuously repeating.
> >
> > I only have one NIC in that system, which is hme0. There is no hme1.
> >
> > Hmmm... Here's output from ifconfig:
> >
> > # ifconfig hme0
> > hme0: flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500
> >     <snip>
> >
> > # ifconfig hme1
> > ifconfig: SIOCGIFFLAGS: hme1: no such interface
> > #
> >
> > Now we know where orcallator is hanging up. Can I disable the check
> > for hme1 in a config file?  I'll check it out and report back. If
> > someone knows exactly where and how to disable this, I'd be greatfull
> > for the tip.
> >
> > Thanks Charlie!
> >
> > - Mark