[Orca-users] orcallator redhat install help
rhfreeman at micron.com
rhfreeman at micron.com
Fri Nov 5 01:58:51 PST 2004
Here is a patch for procallator.pl.in to fix it:
264c264
< ($dumb, $if_name[$i][$r])=split /^ +/,$if_name[$i][$r];
---
> $if_name[$i][$r] =~ s/\s*(\S+)\s*/$1/;
(or I'm sure there are plenty of other ways to remove spaces)
Basically, the problem is that the "vmnet8" interface has a longer name than normal. The net result is that there isn't any blank space at the start of the line before the interface name. So this line in procallator.pl:
($dumb, $if_name[$i][$r])=split /^ +/,$if_name[$i][$r];
Mangles the interface name without the spaces being present at the start of the line.
Rich
> -----Original Message-----
> From: Steven Cortéz [mailto:steven at triad.rr.com]
> Sent: Thursday, November 04, 2004 3:36 PM
> To: rhfreeman; blair at orcaware.com
> Cc: orca-users at orcaware.com
> Subject: Re: [Orca-users] orcallator redhat install help
>
> Here's the output:
>
> cat /proc/net/dev
> Inter-| Receive
> | Transmit
> face |bytes packets errs drop fifo frame compressed
> multicast|bytes packets errs drop fifo colls carrier compressed
> lo:267408176 2067899 0 0 0 0 0
> 0 267408176 2067899 0 0 0 0 0 0
> eth0:1063907135 600139743 0 0 0 0 0
> 0 31114061 331087 0 0 1900 0 0 0
> eth1: 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0
> eth2:2729310709 1296738856 0 0 0 1 0
> 0 2144543108 126111033 0 0 710 0 0 0
> vmnet8: 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0
>
> \\\|///
> \\ - - //
> ( @ @ )
> ---------------------------oOOo-(_)-oOOo-------------------------
> Steven Cortéz
> Senor Unix System Administrator
> New Breed Corporation
> 4239 Piedmont Parkway
> Greensboro, NC 27410
> Phone: 336-218.7535 x8176
> .oooO
> -------------------------- ( )-- Oooo. ------------------------
> \ ( ( )
> \_) ) /
> (_/
>
> ( (
> _______
> )) )) .--"There's always time for a good cup of
> coffee"--. >====<--.
> C|~~|C|~~|
> (>--------------------------------------------------<) | = |-'
> `--' `--'
> `--------------------------------------------------' `------'
>
>
> ----- Original Message -----
> From: <rhfreeman at micron.com <mailto:rhfreeman at micron.com> >
> To: <steven at triad.rr.com <mailto:steven at triad.rr.com> >;
> <blair at orcaware.com <mailto:blair at orcaware.com> >
> Cc: <orca-users at orcaware.com <mailto:orca-users at orcaware.com> >
> Sent: Thursday, November 04, 2004 4:17 AM
> Subject: RE: [Orca-users] orcallator redhat install help
>
>
> Can you do:
>
> cat /proc/net/dev
>
> And show me the output?
>
> As for the graphs... the Linux collectors does collect
> different information from the Solaris collector. So whilst
> some graphs will be common between the systems, each
> architecture will have some graphs which are specific to that
> architecture.
>
> Ta,
>
> Rich
>
> > -----Original Message-----
> > From: orca-users-bounces+rhfreeman=micron.com at orcaware.com
> <mailto:orca-users-bounces+rhfreeman=micron.com at orcaware.com>
> > [mailto:orca-users-bounces+rhfreeman=micron.com at orcaware.com]
> > On Behalf Of Steven Cortéz
> > Sent: Tuesday, November 02, 2004 4:43 PM
> > To: Blair Zajac
> > Cc: orca-users at orcaware.com <mailto:orca-users at orcaware.com>
> > Subject: Re: [Orca-users] orcallator redhat install help
> >
> > Should I expect to see the same graphs in linux as I see in
> > solaris? Also..any ideas on the error below?
> >
> > \\\|///
> > \\ - - //
> > ( @ @ )
> > ---------------------------oOOo-(_)-oOOo-------------------------
> > Steven Cortéz
> > Senor Unix System Administrator
> > New Breed Corporation
> > 4239 Piedmont Parkway
> > Greensboro, NC 27410
> > Phone: 336-218.7535 x8176
> > .oooO
> > -------------------------- ( )-- Oooo. ------------------------
> > \ ( ( )
> > \_) ) /
> > (_/
> >
> > ( (
> > _______
> > )) )) .--"There's always time for a good cup of
> > coffee"--. >====<--.
> > C|~~|C|~~|
> > (>--------------------------------------------------<) | = |-'
> > `--' `--'
> > `--------------------------------------------------' `------'
> >
> >
> > ----- Original Message -----
> > From: Steven Cortéz
> > To: Blair Zajac
> > Cc: orca-users at orcaware.com <mailto:orca-users at orcaware.com>
> > Sent: Monday, November 01, 2004 6:06 PM
> > Subject: Re: [Orca-users] orcallator redhat install help
> >
> >
> > Ok...I now get the following error:
> > [root at iscsv151 iscsv151.newbreed.com]# Use of uninitialized
> > value in numeric eq (==) at /usr/local/bin/procallator line 518.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 239.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> > Use of uninitialized value in concatenation (.) or string at
> > /usr/local/bin/procallator line 276, <F_NET_DEV> line 7.
> >
> > \\\|///
> > \\ - - //
> > ( @ @ )
> > ---------------------------oOOo-(_)-oOOo-------------------------
> > Steven Cortéz
> > Senor Unix System Administrator
> > New Breed Corporation
> > 4239 Piedmont Parkway
> > Greensboro, NC 27410
> > Phone: 336-218.7535 x8176
> > .oooO
> > -------------------------- ( )-- Oooo. ------------------------
> > \ ( ( )
> > \_) ) /
> > (_/
> >
> > ( (
> > _______
> > )) )) .--"There's always time for a good cup of
> > coffee"--. >====<--.
> > C|~~|C|~~|
> > (>--------------------------------------------------<) | = |-'
> > `--' `--'
> > `--------------------------------------------------' `------'
> >
> >
> > ----- Original Message -----
> > From: "Blair Zajac" <blair at orcaware.com
> <mailto:blair at orcaware.com> >
> > To: "Steven Cortéz" <steven at triad.rr.com
> <mailto:steven at triad.rr.com> >
> > Cc: <orca-users at orcaware.com <mailto:orca-users at orcaware.com> >
> > Sent: Monday, November 01, 2004 2:41 PM
> > Subject: Re: [Orca-users] orcallator redhat install help
> >
> >
> > > Steven Cortéz wrote:
> > > > Hello,
> > > > I'm trying to install orca-0.27 on my redhat linux
> > boxes and I'm
> > > > having problems starting the program up. I've tried to
> > hack it so that
> > > > it wouldn't look for the SE toolkit and nothing happens.
> > I've tried
> > > > using procallator but that half works (not all things are being
> > > > graphed). What am I missing here...orca installs just
> > fine...but looks
> > > > like it needs the SE tool kit...and procallator doesn't
> > work 100%.
> > > > Please any help will be greatly appreciated.
> > > > Thanks,
> > > >
> > > > Steven Cortéz
> > > > Senor Unix System Administrator
> > >
> > > Hi Steven,
> > >
> > > You should really try the latest Orca snapshot. I
> > regularly install it
> > > on RedHat and it works fine there.
> > >
> > > http://www.orcaware.com/orca/pub/snapshots/
> <http://www.orcaware.com/orca/pub/snapshots/>
> > >
> > > If this doesn't work, then please let me know and we'll
> > work on getting
> > > the bugs fixed.
> > >
> > > Regards,
> > > Blair
> > >
> > > --
> > > Blair Zajac <blair at orcaware.com <mailto:blair at orcaware.com> >
> > > Plots of your system's performance -
> http://www.orcaware.com/orca/ <http://www.orcaware.com/orca/>
> >
> >
> >
> > _______________________________________________
> > Orca-users mailing list
> > Orca-users at orcaware.com <mailto:Orca-users at orcaware.com>
> > http://www.orcaware.com/mailman/listinfo/orca-users
> <http://www.orcaware.com/mailman/listinfo/orca-users>
> >
>
More information about the Orca-users
mailing list