[Orca-users] setoolkit on solaris 8

[Jaouich.Cyril at hydro.qc.ca]

Hi Oliver, 

        I had the same problem with a Solaris 8, I ended up commenting the
parameter #define USE_RAWDISK in the orcallator.se

	  I believe the problem is with the number of disks you have. Maybe
Blair can shed a bit of light on this. I hope it will be fixed in the next
release.

        Thanks 

Cyril Jaouich (Consultant Unix)
------------------------------------------
Support technique des infrastructures Unix
------------------------------------------
Tél: 514-840-3000x5527



-----Message d'origine-----
De : Oliver.Walter at boschrexroth.de [mailto:Oliver.Walter at boschrexroth.de] 
Envoyé : mercredi 20 août, 2003 09:22
À : orca-users at orcaware.com
Objet : [Orca-users] setoolkit on solaris 8


Hallo Orca users,

i`ll try to run setoolkit on solaris 8 with orcallator.se:

export PATH=$PATH:/opt/RICHPse/bin
export
SEPATH=/opt/RICHPse/examples:/opt/RICHPse/toptool:/opt/RICHPse/orcallator

se  -DWATCH_OS -DWATCH_WEB orcallator.se 10 &

after 5 secs i get:

root at bridge19:/opt/RICHPse#
[1]+  Segmentation Fault      se -DWATCH_OS -DWATCH_WEB orcallator.se 10
root at bridge19:/opt/RICHPse#

setoolkit is running zoom.se without any probs.

a truss  gives the following output:
... 1000 lines ...

ioctl(8, KSTAT_IOC_READ, "")                    = 16001
ioctl(8, KSTAT_IOC_READ, "ssd0")                = 16001
ioctl(8, KSTAT_IOC_READ, "ssd1")                = 16001
ioctl(8, KSTAT_IOC_READ, "sd6")                 = 16001
ioctl(8, KSTAT_IOC_READ, "ssd2")                = 16001
ioctl(8, KSTAT_IOC_READ, "ssd3")                = 16001
ioctl(8, KSTAT_IOC_READ, "ssd4")                = 16001
ioctl(8, KSTAT_IOC_READ, "ssd5")                = 16001
ioctl(8, KSTAT_IOC_READ, "1/md101")             = 16001
ioctl(8, KSTAT_IOC_READ, "1/md102")             = 16001
ioctl(8, KSTAT_IOC_READ, "1/md100")             = 16001
close(8)                                        = 0
    Incurred fault #6, FLTBOUNDS  %pc = 0xFFFFFFFF7E63BFB4
      siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
    Received signal #11, SIGSEGV [default]
      siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
        *** process killed ***

we have a SUN T3 Storage via FCAL connected to maschine with vxfs
and the maschine is running with SUN Cluster 3.0 Software.

Does anybody have an idea to fix this? Maybe a specific patch?

regards

Oliver Walter

Zentrale Informationsverarbeitung
Bosch Rexroth AG
The Drive & Control Company
Sandweg 45
D-97737 Gemünden-Langenprozelten
telefone: +49(0)9352-18-1862
mailto:oliver.walter at boschrexroth.de
http://www.boschrexroth.com

_______________________________________________
Orca-users mailing list
Orca-users at orcaware.com
http://www.orcaware.com/mailman/listinfo/orca-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </pipermail/orca-users/attachments/20030820/7a32c0b7/attachment.html>