[Orca-users] RE: Problem with orcallator.se in SAN and/or T3-environments

[Sean O'Neill]

At 11:26 AM 2/20/2003 -0600, Sean O'Neill wrote:
>At 06:11 PM 2/20/2003 +0100, B.Schopp at gmx.de wrote:
>> > At 04:08 PM 2/18/2003 -0800, Blair Zajac wrote:
>> > >Burkhardt,
>> > >
>> > >Thanks for the patch.  Sean is working on integrating this into
>> > >the Orca source tree.
>> > >
>> > >For the disk run percent change, I think there's a extra + in this line
>> > >near the end that can be removed.  Otherwise, it can match any number of
>> > >blocks of 32 characters of [A-Z0-9].
>> > >
>> > >Your change:
>> >
>> >disk_runp_((?:c\d+t\d+d\d+)|(?:c\d+d\d+)|(?:[ms]d\d+)|(?:c\d+t([A-Z0-9]{ 
>> 32})+d\d+))
>> > >
>> > >New change:
>> >
>> >disk_runp_((?:c\d+t\d+d\d+)|(?:c\d+d\d+)|(?:[ms]d\d+)|(?:c\d+t([A-Z0-9]{ 
>> 32})d\d+))
>> > >
>> > >Does this look ok?
>>
>>Looks quite good for me. I'm not really an expert for regexp... ;-)
>>
>> >
>> > Burkhardt, just because I've never seen one before, can you send an
>> > example
>> > of a T3 disk name plez ?
>>
>>Of course. Here is an output of an sorted ls -l on
>>/dev/dsk/c6*s2:
>>
>>c6t60020F200000B9463DA184BD0000788Ad0s2->../../devices/scsi_vhci/ssd at g60020f200000b9463da184bd0000788a:c
>>c6t60020F200000B9463DA1852400087BE1d0s2->../../devices/scsi_vhci/ssd at g60020f200000b9463da1852400087be1:c
>>c6t60020F200000B9463DA1867F0006063Cd0s2->../../devices/scsi_vhci/ssd at g60020f200000b9463da1867f0006063c:c
>>c6t60020F200000B9463DA186E70008CF2Bd0s2->../../devices/scsi_vhci/ssd at g60020f200000b9463da186e70008cf2b:c
>>c6t60020F200000CFC03DA2E1F1000E9970d0s2->../../devices/scsi_vhci/ssd at g60020f200000cfc03da2e1f1000e9970:c
>>c6t60020F200000CFC03DA2E269000EA901d0s2->../../devices/scsi_vhci/ssd at g60020f200000cfc03da2e269000ea901:c
>>c6t60020F200000CFC03DA2E50700033E82d0s2->../../devices/scsi_vhci/ssd at g60020f200000cfc03da2e50700033e82:c
>>c6t60020F200000CFC03DA2E56A000550F5d0s2->../../devices/scsi_vhci/ssd at g60020f200000cfc03da2e56a000550f5:c
>>c6t60020F200000D10A3DA2DCE4000507BEd0s2->../../devices/scsi_vhci/ssd at g60020f200000d10a3da2dce4000507be:c
>>c6t60020F200000D10A3DA2DD68000BC5B4d0s2->../../devices/scsi_vhci/ssd at g60020f200000d10a3da2dd68000bc5b4:c
>>c6t60020F200000D10A3DA2DF0000034602d0s2->../../devices/scsi_vhci/ssd at g60020f200000d10a3da2df0000034602:c
>>c6t60020F200000D10A3DA2DF77000CF6DEd0s2->../../devices/scsi_vhci/ssd at g60020f200000d10a3da2df77000cf6de:c
>>c6t60020F200000D30F3DA18B3E0008DCBAd0s2->../../devices/scsi_vhci/ssd at g60020f200000d30f3da18b3e0008dcba:c
>>c6t60020F200000D30F3DA18BDB0003112Bd0s2->../../devices/scsi_vhci/ssd at g60020f200000d30f3da18bdb0003112b:c
>>c6t60020F200000D30F3DA6C1EE0004D908d0s2->../../devices/scsi_vhci/ssd at g60020f200000d30f3da6c1ee0004d908:c
>>c6t60020F200000D30F3DA6C2750004A424d0s2->../../devices/scsi_vhci/ssd at g60020f200000d30f3da6c2750004a424:c
>
>Kewl - Thx :)
>
> From the above, Blair's removal of the "extra +" looks to be 
> correct.  I'm going to push your updates with Blair's change.

Actually, can you update your Orca config to use Blair change and make sure 
it works ?


--
........................................................
......... ..- -. .. -..- .-. ..- .-.. . ... ............
.-- .. -. -... .-.. --- .-- ... -.. .-. --- --- .-.. ...

Sean O'Neill